1000CL-CT

Clear acrylic or glass cylinder and stainless Steel Pressure Tank 10.0L

Product Characteristics

Model	1000CL-CT (Acrylic cylinder) 1000CL-CTG (Toughened glass cylinder)
Capacity	10.0 litre
Dimensions	180 mm inside diameter, 492mm overall height, 8.5kg empty
Certification	ASME Section VIII-01, Div. 1 Directive 2014/68/EU Article 4 Clause 3 For group 2 liquids
Material	Wetted parts 303 stainless steel & Clear Acrylic or Toughened glass cylinder
Shell	Cylindrical
Working Rated Pressure	0 to 4 bar at from 0°C to 38°C
Working Rated Vacuum	0 to -0.5 bar at from 0°C to 38°C
Closure	4 plastic star grips
Closure seal	Viton O-ring
Top & Bottom Seals	Viton
Internal finish	Machined
External finish	Machined
Option	None

LID

8mm thick stainless steel

1 INPUT connection ¼” NPT	with pressure regulator & gauge
1 OUTPUT connection ¼” NPT	with compression fitting 6mm
1 OUTPUT connection ¼” NPT	with safety relief valve

Downloads

CT Series Technical Datasheet

Clear Pressure Tanks Literature (EN)

1000CL-CTPS

Manual CT Series

CT Series Refurbishment Program

To ensure the continued safety, reliability, and performance of SR-TEK transparent pressure vessels, we are introducing a refurbishment program for all tanks supplied 5 years or more ago. Over time, tubes may develop signs of stress or fatigue due to repeated pressure cycles.

Scope of Refurbishment:

Visual & Mechanical Inspection: Comprehensive check for crazing, stress marks, cracks, or fatigue on transparent tubes and flanges.
Component Replacement: Acrylic or polycarbonate tubes are replaced with new, factory-approved tubes. All O-rings and gaskets are replaced with new seals.
Pressure Testing: Both low and high-pressure leak tests are performed to verify the integrity of the seals and assembly.
Certification: The tank is returned with a refurbishment certificate, inspection report, and recommended future service intervals.

Process & Contact:

The typical turnaround time is 2 weeks. To schedule a refurbishment or receive an RMA number, please contact us: